The refrigerator unit is one of the most important pieces of equipment in a kitchen. In addition to being one of the most expensive items, it also accounts for a significant portion of a home’s energy bill. For this reason, it is crucial that the unit is maintained appropriately in order to get the maximum energy efficiency and to avoid an unexpected refrigerator repair. The homeowner can do many of these tasks on their own. But a professional can give the unit a thorough examination to rule out major issues. Here are some of the most important areas to check regularly:
Thoroughly Clean the Condenser Coils
The condenser coils should be checked and cleaned about once a month in order to keep the appliance in optimal condition. A specialized cleaner meant is needed to clean this area of the refrigerator. Make sure to brush the condenser fins from top to bottom in order to clean it thoroughly. This can help prevent any problems that would require a refrigerator repair maytag refrigerator repair pasadena.
Clean and Check the Fan Blades
It is crucial that the fan runs well in order to keep the unit as cool as possible. Dirty fan blades will make the motor to work harder than it should, causing it to wear down quicker. Keeping the blades as clean as possible will prevent this problem. To clean the fan blades, you will need a soft cloth. Wipe down the blades until they are free of dust and dirt. If the fan blades are very dirty, use a cleanser to wipe them down, then allow them to dry. Make sure to cover the motor with another towel or cloth so that no liquid cleaner can get inside. Check the fan blades on a monthly basis for cleanliness.
Check the Gaskets on the Doors
The unit can lose a significant amount of cool air if the gaskets are damaged or worn out. Not only will this result in spoiled food but it will also increase your energy bill. Be sure to check the gaskets every other week to once a month. An easy way to check them is to attempt to slip a sheet of paper between the closed door and the gasket. If the paper can get between the door and gasket, it can signify a problem. To maintain the gaskets, remove them from the door and soak them in soapy water for about an hour. Allow them to dry really well and place them back on the refrigerator door. Check to ensure they are properly sealed. If the gaskets don’t create a good seal, they will likely need to be replaced.
Keeping the refrigeration unit clean and maintained properly is just one step towards optimal energy savings. In addition to doing refrigerator repair by yourself, be sure to schedule regular maintenance checks with the manufacturer or a professional. To spot any issues before they become a major problem.