Easy Refrigerator Repair Fixes You Can Do at Home to Fix Your Leaky Fridge

Leaky fridge? Do-it-yourself refrigerator repair may do just the trick!

When you walk into your kitchen to find a puddle forming underneath your refrigerator, it can be quite alarming, especially if your fridge doesn’t have an ice maker or a water dispenser. In addition to creating a mess, a leaking refrigerator can cause damage to your home. Fortunately, there are a number of steps that you can take to address a leaky icebox that will save you time and money over calling a professional refrigerator repair service kenmore refrigerator repair altadena.

The first thing you should do upon finding a puddle of water on the kitchen floor is to make sure it’s actually coming from the refrigerator. This may seem silly, but there are more than a few people who have panicked over a broken refrigerator, only to find that the water was from a spill. There have even been cases where homeowners called in a refrigerator repair technician, who found nothing wrong with the appliance until he observed the customers’ young child walk through the kitchen and depress the lever for the water dispenser just for the fun of it. If you’ve got obvious signs of water dripping down the fridge door from the water and ice dispenser, or you have a puddle in the middle of the floor, a significant distance from your refrigerator, it’s a safe bet that the problem lies somewhere else.

Once you’re convinced that the problem lies within your refrigerator, you should check your water supply line, which will be connected to your fridge if you have an ice maker or water dispenser. The water supply line connects to the back of your refrigerator, so if there is a leak there, you should be able to see it by pulling the refrigerator out. Depending on the part that is leaking, you may be able to fix it with some simple refrigerator repairs by simply replacing the tubing or tightening the compression nuts near the inlet valve.

Even if your refrigerator doesn’t have a water/ice dispenser (and thus no water supply), you may still experience leaks due to condensation or melting ice. If you notice a puddle coming from underneath your refrigerator, it can likely be traced to the drip pan at the bottom of the unit. Water from the refrigerator drips into this pan where it evaporates. If your refrigerator is tilted, however, the water could spill out onto the floor. The answer to this problem is another fairly simple refrigeration repair: leveling the fridge. The refrigerator should be completely level from side to side, and tilted slightly toward the back. If necessary, you can pull off the front kickplate or grille and turn the adjustment screws with a screwdriver to raise or lower the front corners of the refrigerator until it is tilted properly.

Leaks occurring inside the refrigerator compartment or underneath the freezer are often caused by a clogged drain tube. Fortunately, this is another refrigerator repair that you can perform on your own. To begin, remove the cover panel in your freezer. You may have to pry off the screw covers with a putty knife, and then remove the screws, depending on the refrigerator model. Clear out any excess ice buildup using a hairdryer and some towels. Then, use a tube to blow into the drain hole, clearing it of any debris. Before replacing the cover panel, pour some water into the drain tube to make sure it is draining properly.

These simple refrigerator repairs should keep your floor dry and restore your refrigerator to its proper working condition with minimal effort. If you can’t find the source of the leak, or your refrigerator continues to leak after you’ve gone through these steps, it may be time to call in the pros. Your local appliance repair service should be able to answer any questions that you may have.

Refrigerator Repair Tips To Know

The refrigerator unit is one of the most important pieces of equipment in a kitchen. In addition to being one of the most expensive items, it also accounts for a significant portion of a home’s energy bill. For this reason, it is crucial that the unit is maintained appropriately in order to get the maximum energy efficiency and to avoid an unexpected refrigerator repair. The homeowner can do many of these tasks on their own. But a professional can give the unit a thorough examination to rule out major issues. Here are some of the most important areas to check regularly:

Thoroughly Clean the Condenser Coils

The condenser coils should be checked and cleaned about once a month in order to keep the appliance in optimal condition. A specialized cleaner meant is needed to clean this area of the refrigerator. Make sure to brush the condenser fins from top to bottom in order to clean it thoroughly. This can help prevent any problems that would require a refrigerator repair maytag refrigerator repair pasadena.

Clean and Check the Fan Blades

It is crucial that the fan runs well in order to keep the unit as cool as possible. Dirty fan blades will make the motor to work harder than it should, causing it to wear down quicker. Keeping the blades as clean as possible will prevent this problem. To clean the fan blades, you will need a soft cloth. Wipe down the blades until they are free of dust and dirt. If the fan blades are very dirty, use a cleanser to wipe them down, then allow them to dry. Make sure to cover the motor with another towel or cloth so that no liquid cleaner can get inside. Check the fan blades on a monthly basis for cleanliness.

Check the Gaskets on the Doors

The unit can lose a significant amount of cool air if the gaskets are damaged or worn out. Not only will this result in spoiled food but it will also increase your energy bill. Be sure to check the gaskets every other week to once a month. An easy way to check them is to attempt to slip a sheet of paper between the closed door and the gasket. If the paper can get between the door and gasket, it can signify a problem. To maintain the gaskets, remove them from the door and soak them in soapy water for about an hour. Allow them to dry really well and place them back on the refrigerator door. Check to ensure they are properly sealed. If the gaskets don’t create a good seal, they will likely need to be replaced.

Keeping the refrigeration unit clean and maintained properly is just one step towards optimal energy savings. In addition to doing refrigerator repair by yourself, be sure to schedule regular maintenance checks with the manufacturer or a professional. To spot any issues before they become a major problem.

 

Washing Machine Repairs – Interlock Door Will Not Open

Getting the interlock to release the door on a washing machine that needs repairs is a very common job for any engineer. The interlock is the device that keeps the door locked throughout the entire wash cycle. Its main purpose would probably be to keep anyone from opening the door during the wash as this would lead to a flood situation but it also safeguards children from opening the door and doing harm to themselves.

A common reason for the interlock going faulty is some one trying to force the door open before the interlock is ready to release the door. If you find the door on your washer will not open the first thing to do is look through the glass section of the door and try to identify whether there is even a small amount of water in the machine. If there is, then that is the likely reason the door will not open. If you can clear the water the the door will probably open without the need to try and force the interlock to open the door ge washer repair pasadena.

In this instance the best 3 ways to try to clear the water, is first, using the main program controller select stop, then select reset or go straight to reset and wait about 5 second. On some machines a neon light on the control panel will start to flash. On other machines the neon will change from illuminating near the word wash to illuminating near the word stop, and other machine may not have any neon lights at all, and you will need to work out how your machine reset feature works and that may mean consulting your user manual.

Once you have done that select drain or spin this should empty any access water in your appliance and then the door should open after the 2 or 3 minute delay. If when you select drain or spin you do not hear the pump come on. Its normally a light whirling sound coming from the front right hand side of the machine and there is still water in the appliance you can try emptying the water from the pump filter or by placing the washing machine waste pipe hose into a mop bucket and letting gravity do its work, but beware both these methods could cause a lot of water to end up on your floor, once all the water has gone the interlock should release the door after the 2 or 3 minute delay, if none of these methods work for you then you will probably need a engineer.

High Capacity Washing Machines Promising Good Efficiency

GE brands are one of the well-recognised leaders across the industry known for delivering high quality washing machines at affordable costs.

They lay strong emphasis on creating products with high value which have more consumer utility.

GE washing machines enjoy lot of credibility and reputation in the market so it becomes easy to get service in case of washing machine repairs lg washer repair pasadena.

One of the main highlights of GE washing machines is their large capacities with a large range of models to choose from different prices.

If you are looking for low priced and economical models, then GE washing machines offers a good value for your money. Their performance is simply superb and long lasting and is definitely worth giving a try!

GE Profile Harmony Washing Machine

This is one of the best top loading models based on the latest technology for cleaning clothes and works best with all kinds of fabrics. It is equipped with the hydrowash system that is specially meant for treating delicate fabrics. Besides, the stain inspector system promises to help in removing different types of stains found on the clothes.

GE Profile WPGT9360E offers state of the art LCD screen display with easy to use controls with a display timer. There are different programs and settings that can be set according to your needs using automatic sensors for excellent cleaning performance. The Hydroview features enable you to have a peek into your washing machine operation using the see through screen without opening the lid.

This model specially comes with a sleek design with minimum noise levels equipped with better efficiency. This version comes with a 4.0 cubic foot stainless steel basket that can handle both small and large loads. The hydroheater temperature helps in curbing bacteria by increasing the water temperature.

The main drawback is that since it is a new technology, most of the washing machine repairs have to be handled only by professionally experienced people who understand this technology well. It is also slightly expensive and may not be suitable for those looking at economical range of washing machines.

GE WJRE5500GW model

This is one of the most popular models among GE washing machines which has some amazing features that includes the king size load that it can handle efficiently.

You can find about 18 different kinds of cycles and wash on every possible type of fabric using this model. This unique model provides about 4 wash and rinse temperature settings that you can choose depending on the kind of clothes that require cleaning.

Save on your electricity bills by opting for different water levels that help you conserve water at all times. Most of the customers appreciate the fact that it is comparatively quieter and calm as compared to other washing machine brands that make a lot of noise.

Finding washing machine repairs and replacement of parts will not be a big problem with this brand of washing machine. For minor washing machine repairs, it is best to seek solution through troubleshooting manuals that are provided when you purchase the washing machine.

Often, some customers have experienced problems with this model due to the high intensity spinning that has often damaged the clothes. The automatic load balancer feature is missing in most of the high-end models which is a concern when overloading the machine which can lead to frequent washing machine repairs.

Is Your Clothes Dryer Quietly Plotting To Kill You?

A rather startling question to pose considering that most of us, an estimated 8 out of 10 households, have a clothes dryer in our home and that they’re used on a regular, consistent basis without too much thought. What mighty fine pieces of modern marvel they are, too…those ole’ trusty clothes dryers! They certainly make life easier and they’re generally safe to operate. Let’s be honest, though…we take our clothes dryers for granted! We wash our clothes, toss em’ in the dryer, and expect that the end result will be an uneventful load of nice, dry, clean-smelling laundry. Indeed, that is the usual result. However, as with many of the relatively complex systems that comprise a home environment, there are some safety considerations to ponder and of which we need to maintain an awareness whirlpool dryer repair pasadena.

Again, clothes dryers are generally safe…as long as they’re properly installed, well vented, and receive periodic maintenance. Maintenance, you say? You mean like changing the oil in the family car? Well, yes…precisely that sort of routine maintenance albeit on, perhaps, a less frequent basis. The clothes dryer and its venting system need…no, require, periodic maintenance to keep you safe and to dry your clothes as efficiently and inexpensively as possible. Let’s examine those two concepts as they relate to clothes dryers…those of safety and of monetary efficiency.

As for the safety aspect, it’s really fairly simple. Your clothes dryer has the potential to catch fire and burn your house down. And, most unfortunately, a resulting house fire can kill you! Have I acquired your attention? Between 2004 and 2006, according to the National Fire Incident Reporting System (NFIRS), there were an estimated 15,600 related residential fires that required a fire department response. Those fires caused an estimated annual monetary loss of $99 Million, 400 injuries, and 15 fatalities. The leading cause of those fires was determined to be a failure to maintain the system. What causes these expensive, and sometimes deadly, clothes dryer related fires in the first place?

Clothes dryers do their job by forcing heated air through a rotating drum that contains your load of laundry. As the moisture is released, lint is created from the fibers of the content…clothing, towels, etc. Most of the lint is filtered by the clothes dryer filter…the one we are familiar with that’s usually located inside the door or on top of the unit; most of us are familiar with the need to clean that filter after every load of laundry. But some of that lint makes it past the filter and can collect in the ductwork between the clothes dryer and the exhaust hood (the discharge end of the duct that should…should, I say, be located be at the exterior of the building). The accumulation of lint inside the ductwork, or in an uncleaned filter, serves to create a restriction to the airflow and a concentration of lint which is a very combustible fuel source.

Often, the types of installed ducts are conducive to venting problems. There are generally four different types of ducts. There are rigid metal ducts that are smooth on the inside; these are by far the safest types of ducts because they aren’t prone to sagging and are relatively easily cleaned. There are semi-rigid, semi-flexible ducts that are not quite as “good” as rigid metal ducts but are also a reasonable choice. And then there are the other two types…flexible foil and flexible plastic. These latter two types account for the majority of deficient issues that I see relating to clothes dryer ducts. They are thin, are prone to sagging and to physical damage, are not able to be readily cleaned, and should just plainly be avoided. Those plastic ducts will not only do absolutely nothing to contain a fire should one start in or near the duct, they will actually readily burn themselves…bad, bad, bad! Then there’s the “failure to clean” aspect where the duct is mostly blocked with lint. It’s these conditions of improperly installed ductwork, the use of unsafe or improper ductwork, or a failure to maintain the cleanliness of the ducts that cause the most troublesome issues. It’s worthy of note that most all manufacturers of clothes dryers disallow the use of those horrid plastic flexible ducts; nonetheless, they continue to be used in many homes…even in newer homes! Also worthy of note is that, in most jurisdictions, those plastic flexible ducts have never been allowed to penetrate floors or walls… but that’s a commonly observed configuration as well.

Even when an acceptable material has been installed, ductwork can be damaged e.g. that portion of the duct that is behind the dryer between the dryer and the wall. Dryer duct hoods can get bent or become clogged with lint. Or, the back-draft damper of the hood can be incapacitated such that it doesn’t fully close; when this occurs, vermin such as rodents and insects can enter the duct or birds can enter the duct and build nests that can severely restrict or block the airflow.

As for the monetary efficiency of the operation of your clothes dryer (meaning the amount of money you’ll spend to operate it), that’s fairly simple, too. A dryer that’s not well vented, that has a clogged filter, or that has a partially or wholly clogged vent duct has to work all that much harder, and longer, to dry your clothes. Any or all of those conditions will contribute you to having to spend more of your hard-earned money to operate the dryer and can directly (and quickly I might add) lead to outright failure of the dryer. Simply put, it’ll cost you more money to do your laundry while your clothes dryer approaches its pending failure. Then, when it quits, you’ll have the unanticipated opportunity to plunk down a considerable amount of money to replace it. Now, to me, that doesn’t sound like a pleasant scenario. Does it to you?

So…what can you do to prevent potential catastrophe and operate your clothes dryer as efficiently as possible? First, clean your clothes dryer duct, or have it cleaned, on a regular basis; annually might be good starting point but some systems might require more frequent cleaning. Second, make sure that the duct system is in a safe and fully functional condition. Have a professional assess the condition and configuration of the system in your home. Such a professional might be a licensed Home Inspector or a licensed Heating, Ventilation, and Air Conditioning (HVAC) professional…either of these types of professionals should be able to assess your system and make pertinent recommendations. In many instances where flexible foil or flexible plastic ducts are installed, a recommendation to replace those types of ductwork with a more suitable product, one that is both safer and is more readily cleaned, would not be unreasonable.

In summary, clothes dryers are great inventions that make our lives easier on a daily basis. However, we tend to take them for granted and, if not well installed or properly maintained, they can be problematic. An improperly configured duct system, or the use of certain types of dryer ducts, or a failure to maintain the system can lead to an excessive consumption of your money. Much worse and of greater import, these deficiencies can cause a house fire that can take your life or cause significant damage to your home. Inspect your system and its installation, or have it evaluated by a professional and repaired or corrected as needed…the condition of your wallet, and maybe even your very life, may depend on it!

The Best Way to Go About Hiring an Appliance Repair Professional

When something in your home such as your oven or washer and dryer break, you have to hire a professional technician to fix the issue. It is not a good idea to wait to get it fixed because it could get worse. Not only could the issue get worse, but you won’t have a washer and dryer to use or an oven to cook out of. Something else that you should think about is that if you don’t get an appliance issue repaired right away you could end up coming out of pocket even more to replace the entire appliance. Yes-most of the times it is actually cheaper to hire an appliance technician to fix a minor issue as opposed to replacing the whole thing. It also depends on how bad the issue is that needs to get fixed though Appliance Repair Van Nuys.

Upon your first instinct you’d probably think to open up a phone book to look up a repair service or to look it up online. However, there are also other alternatives that might turn out to be better when it comes to looking for a professional to fix your appliances for you.

Word of Mouth Reference

It’s better to ask someone that you know and trust their opinion about appliance professionals that they’ve hired in the past to come and fix things in their homes. If you are close to your neighbors or friends with them you could always knock on their door to ask them if they know of a good appliance company that would be of help to repair something in your home. Make sure they refer the person that they used at the company and not just the company alone. Not only can you ask your neighbors, but you could also ask your family members and friends about if they know of someone that they could recommend to you for appliance repair.

Online Search

Will searching online get you the results that you are looking for when you are trying to find a professional appliance repair worker? It is highly possible, but when going about this way of searching you should not just choose the first person you see pop up in the search results. You should dig deeper and read about them and their experience. If they are with a large company you should read more about how long the company has been operating and what type of experience they have when it comes to performing appliance repairs. Some before and after pictures showing the work that they have done would give you a better example of how the company works.

Websites like these usually also have testimonials to help with boosting a professional appliance company’s reputation. On most appliance repair websites there should be an option for you to fill out your information so that they can give you call to give you a quote on whatever it is that you need fixed. Be sure to shop around and get several quotes before making a final decision on what company you’d like to go with.

5 Tips for Home Appliance Repair

Home appliances have become a part and parcel of each and every household. They have made our life so much easier that it is almost impossible for us to think about living without these appliances. It is because of this very reason that when these home appliances develop faults and stop working, we get frustrated and want them to be fixed right away. Most of the time the issue with the appliance that is causing it to malfunction or stop functioning at all is a small one which can be dealt with at home without encountering any problems. You just have to remain calm and know what to do. The following are 5 tips for home appliance repair that can help you in fixing your appliances yourself Jennair Appliance Repair.

Make Sure Appliance is Plugged On

One of the major reasons why home appliances suddenly stop working is because they haven’t been plugged on. All of the home appliances are electric machines that run on electricity. If you have not plugged them in then there is no way that they are going to work. Thus, if you find that your home appliance isn’t working at all then before jumping to any conclusions make sure that it has been properly plugged in or not. If it is then check the circuit breakers and fuses for any issues. Reset or replace them if necessary and try to switch on the appliance again. If this does not work then there might a problem with one of the components of the appliance.

Adopt a Safety First Policy

Before beginning any repairs on the appliance, make sure that you take care of your own safety. Never try to examine or repair an appliance while it is running or even plugged on. Unplug the device and then go ahead with the inspection. Some appliances like dryers have very sharp edges so be careful when examining them. Make sure that you have tied your hair back so that they do not come in the way when you are inspecting or repairing your appliance. Always wear steel-toed safety when repairing any home appliance no matter how small it is and make sure that you do the repair work in an area that is well-lit. It is also advisable to take off any jewelry items that you might be wearing before working on any appliance.

Make Use of the Right Tools

One of the most important things that you would have to keep in mind when repairing any home appliance is that you make use of the proper tools for this purpose. It is always good to have specialty tools like pliers, wrenches, nut drivers, ammeters and voltmeters on hand if you want to repair your home appliances yourself. These tools are easily available in the market and can help you a great deal when it comes to diagnosing and fixing simple issues with your appliances. For instance, having an ammeter is going to make it easier for you to test whether your appliance is getting the current it requires or not while having a complete nut driver set will ensure that you are able to open your faulty appliance without encountering any trouble what so ever.

Replace Faulty Parts Instead of Repairing Them

If you find that your appliance is not working properly because of a faulty part then it is best to replace it immediately. Do remember that repairing faulty parts is a job only for the professionals and thus must be left to them alone. So, don’t try repairing the faulty parts yourself and instead find a replacement part and install it in its place. When replacing any parts in any of your home appliances make sure that you follow the guidelines mentioned in the manufacturer’s guide that came with the appliance. Open the appliance as per the guidelines, take out the faulty part and then replace it with a new one. After the replacement is done, securely tighten the screws and test the appliance to make sure that it is working properly again.

Seek Professional Help if Something Goes Wrong

It is important to keep in mind that sometimes the problem with the appliance is a major one and cannot be repaired at home. If you find that the issue with your appliance is too complicated for you to handle or if something goes wrong while doing the repair work on the appliance then seek professional help immediately. Call a technician and make sure that he knows what you have been doing so that he is able to rectify any mistakes that you might have done while repairing the appliance yourself.

 

Washing Machine Not Draining, Washing Machine Not Spinning

When your washing machine stops mid cycle and leaves water and your washing standing still, there are ways to drain out the water and also to get your washing out of the machine instead of waiting maybe 2 or 3 days before the repair man turns up, that is if the machine is insured and by then your cloths will be in a bad smelling state.

The first step to check is where the blockage of the washing machine lies Washer Repair Los Angeles, set the program to spin (this is indicated by the spiral sign) or drain only (this is a bucket with an arrow pointing down). Most appliances are plumbed under the sink unit, locate the drain hose and hold unto it, turn the machine ON, if the sink connection is blocked you will feel the drain hose expanding, remove the hose from the connection point and clear and gung, lime scale or fatty deposit, if not we take second action.

Listen out to the sound the washing machine makes. If the pump is blocked there will be a humming sound, now at this point since the machine is full of water and heavy, wiggle the machine out from under the worktop. Tip the washing machine backwards and wedge it under the worktop, put a bowl under the pump filter, unscrew the filter cap, drain out the water from the machine. Now put your finger deep into the pump, by now the machine should be turned OFF from the mains, we don’t want any accidents do we. Turn the pump impeller with your finger, this should turn freely, remove any objects blocking the impeller ie coins, hair clips, lime scales etc.

You will now have to refit the filter cap back on, make sure it is secured, we don’t want any water leak, turn the washing machine back ON, still on spin mode and we should have our washing machine back working again.

Appliance Repair Services

In a household having a problem with the appliances can be a troublesome thing and you surely look forward to getting them fixed as soon as possible. There are several appliance repair companies you can find in your local area that can help you.

Home appliances form an important part of every household and you would want all of them to run smoothly and even a problem with one of these can give you a lot of problems. It is very important to hire a professional repairman who can bring back your appliances in working condition Whirlpool Appliance Repair Los Angeles.

The first thing you should do when you face problem with any of your appliance is to check the manual. This is important as the problem may not be big enough to hire a repairman and can be fixed by you at home only. This can help you save on some unnecessary expenditure.

The next thing to check is whether the appliance is in warranty period or not. If it is in warranty you can contact the authorised dealer to get it repaired for free or very minimal price. If it is not in warranty, then you can contact any of your local repairman to do the task for you.

It is advisable to select a company only after proper research and investigation. There can be many people who might be offering appliance repair services in your area. You can call them and ask them about their experience and availability. You can also ask your friends, relatives or neighbours for recommendations as they might have taken the services of any of these professional at some point of time.

You can also look for companies online. This can help you get a better idea about their reputation and the time duration they have been working in the field. You can read reviews of the customers on their website to get a better idea about their services.

Price is also an important factor to consider before hiring an appliance repair company. You can contact a number of service providers and compare their prices. This can help you get a bargain price. You can tell them the nature of problem in your appliance so that they can broadly quote a price for you.

You must take your time before hiring any company to get your appliances repaired. Following some tips can help you get better services at affordable prices. It will also save you from the hassle of finding another company in the future as you can call the same people anytime you need them.

Electrical Clothes Dryer Vs The Gas Operated One

Currently there are two types of clothes dryers on the market. One is the gas dryer, which is really half gas and half electric, and the other one is the full electric one. The gas operated one uses gas for lighting the flame that creates the heat in order to dry the clothes, whereas the electric machine used electricity to operates the engine, the timer, the thermostat and the coil kit.

One of the disadvantages of the gas one is that it has more parts than its electrical counterpart. When you have something with many little parts, there is a greater chance of more parts breaking down. This is why the gas one needs more often repairs than the other one Dryer Repair Los Angeles.

Even if you prefer one over the other one, truly only the connection in your laundry room will tell you which type you can safely install. The electrical unit runs on 240V current which is actually double the regular household current. If your laundry room has not this type of voltage installed, you can either install it or buy a gas dryer. If you have both natural gas and 240V connection, you need to realize that the gas one tends to cost more than the electrical one, however in the long run the cost will be diminished due to the higher cost of general electricity.

The energy factor (the energy efficiency of the dryer) for the electrical clothes dryer is 3.01, while for the gas one it’s 2.67, so it seems that the better one in this case is the electrical option due to its higher energy efficient factor.

However the gas type tends to dry your clothes faster which means you get to spend less time on your laundry. As the clothes dry faster, they allow faster evaporation of humidity from the clothes.

One problem with gas is that it is more sensitive to venting due to the fumes, so if you buy a gas clothes dryer you need to check the vent pipe often for leakage. When you have an electric type, it can be vented inside during the winter, which you can’t do with gas.

People always will have one preference over the other one based on various criteria, logical or personal. Both appliances are great to dry your clothes but you need to make sure with no matter which you buy that it is kept properly cleaned.